There are numerous factors to consider when selecting screening equipment such as particle shape and size, feed rate, distribution, moisture content, bulk density, number of products to be screened, method of loading, etc.
For each particular application there is an optimum combination of amplitude, frequency, and attack angle.
The major benefits of horizontal screens include lower overall height and more-efficient fine wet processing. The improvement in fine wet screening is attributed to forcing near-size material through the openings with a water spray.
The efficiency improvements are mainly due to a lower travel rate of the material.
Linear Straight line Action for aPositive Particle Conveyance
Screen Decks Easily Changed
Base or Suspended Mounting
Above, Below or Side
Mounted Twin Motor Drives
Body of a Vibrating Screen consists of a base frame and screen supporting structure. The base frame is welded using heavy channels and angles. Screen supporting structure and Screen are made from wear resistant Coil Steel.
Suitable helical coiled springs are provided with the Vibrating Screen. Entire screen holding structure is supported by these springs. Special care has been taken to manufacture these springs which bear entire load along with continuous vibratory process. These springs can easily be replaced by new ones when required.
The foundation frame of the Driving Motor is provided by projection on one side of the Vibrating Screen and supports from base frame are also provided to hold the motor foundation. The size of motor varies as per the size of Vibrating Screen.
The screens are made from special coiled sheets to provide sufficient resistance to excess wear and tear. The hole size of the screening surface can be made as per the requirements of the customer.
For each deck, screen surface is made from single sheet metal and stretched lengthwise to provide robust constructional service. The number of screening surface depends upon the number of decks of the screen. The inclination is given to the screen according to the suitability of work.
No. of Decks:
Normally 2, 3 or 4 deck vibrating Screens are provided against special request). in case of 3 or 4 deck Vibrating Screen one special collecting (discharge) hopper is also provided.